Daikin RP38C11JA-37-30 Rotor Pumps
YOU’LL FIND AN EXTENSIVE SELECTION OF Sundream Industrial Group Co., Limited Daikin RP38C11JA-37-30 Rotor Pumps FOR SALE.
| Brand Name: | Daikin |
| Model Number: | RP38C11JA-37-30 |
| Weight: | 45.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Model No.: | 2520V17A12-1AA22R |
| Port Size: | 2.5 |
| Port Type: | Flange |
| Shaft Key: | 1/4 in |
| Design No.: | 22 |
Product Details
| Weight | 45.0 LB |
| Mounting | Flange Mount |
| Rotation | Right Hand (CW) |
| Model No. | 2520V17A12-1AA22R |
| Port Size | 2.5 |
| Port Type | Flange |
| Shaft Key | 1/4 in |
| Design No. | 22 |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 0.875 in |
| Shaft Type | Straight w/ Key |
| Pump Series | 2520V |
| Shaft Length | 2.32 in |
| Configuration | Double |
| Seal Material | Buna-N |
| Max. RPM [Max | 1800 |
| Minor Diameter | N/A |
| Mounting Flange | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | N/A |
| Vane Function Type | Motor |
| Cover End RPM [Max | 1800 |
| Shaft End RPM [Max | 1800 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | 2520V17A12-1AA22R |
| Front Outlet Port Type | 4 Bolt Flange Per SAE J518C W/ English Threads |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 2500 |
| GPM @ 1,800 rpm, Cover End | 18 |
| GPM @ 1,800 rpm, Shaft End | 25.5 |
| Outlet Port Position [Rear | 135° CCW From Inlet Port |
| Integral Valve Configuration | N/A |
| Port Orientation - Cover End | Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End | Outlet Opposite Inlet |
| Pressure Port Size, Cover End | 3/4 in Code 61 |
| Pressure Port Size, Shaft End | 1 in Code 61 |
| Displacement Cover End (cu in/revolution) | 2.5 |
| Displacement Shaft End (cu in/revolution) | 3.4 |