Rexroth M-3SEW6C3X/420MG25N9Z2/B15VSO214 Directional Seat Valve
What is Rexroth M-3SEW6C3X/420MG25N9Z2/B15VSO214 Directional Seat Valve in mechanical engineering? Rexroth Pump Manufacturing Service . Upload your CAD file for an Sundream Industrial Group Co., Limited instant.
| Brand Name: | Rexroth |
| Model Number: | M-3SEW6C3X/420MG25N9Z2/B15VSO214 |
| Weight: | 45.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Left Hand (CCW) |
| Model No.: | 2520VQ21A11-11BC20-LH |
| Port Size: | 2.5 |
| Port Type: | Flange |
| Shaft Key: | N/A |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 45.0 LB |
| Mounting | Flange Mount |
| Rotation | Left Hand (CCW) |
| Model No. | 2520VQ21A11-11BC20-LH |
| Port Size | 2.5 |
| Port Type | Flange |
| Shaft Key | N/A |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 0.875 in |
| Shaft Type | 13 Tooth Splined |
| Pump Series | 2520VQ |
| Shaft Length | 1.375 in |
| Configuration | Double |
| Seal Material | Buna-N |
| Max. RPM [Max | 2500 |
| Minor Diameter | 0.715 in |
| Mounting Flange | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | 16/32 |
| Cover End RPM [Max | 2700 |
| Shaft End RPM [Max | 2500 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 0.873 in |
| Major Diameter [Min | 0.872 in |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | 2520VQ21A11-11BC20-LH |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 16.5 |
| GPM @ 1,800 rpm, Shaft End | 31.5 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 45° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CCW from Inlet |
| Pressure Port Size, Cover End | 3/4 in Flange |
| Pressure Port Size, Shaft End | 1 in Flange |
| Displacement Cover End (cu in/revolution) | 2.2 |
| Displacement Shaft End (cu in/revolution) | 4.1 |